Automotive steel encompasses a range of advanced high strength steel (AHSS) grades specifically developed for the automotive industry. These steels enable vehicle lightweighting while maintaining or improving crashworthiness, structural integrity, and passenger safety. We supply dual phase steel (DP), high strength low alloy steel (HSLA), martensitic steel (MS), press hardening steel (PHS), complex phase steel (CP), TRIP steel, bake hardening steel (BH), and IF steel. Common grades include DP590, DP780, DP980, HSLA340, HSLA420, MS1500, 22MnB5, CP800, TRIP780, BH210, and DC04/DC06. Products are available in coil and sheet form with precise dimensional tolerances and consistent mechanical properties required for automotive stamping and forming operations.
TRIP Steel (Transformation-Induced Plasticity Steel) — TRIP590 / TRIP780 / TRIP980 — is advanced high-strength steel combining tensile strength 590-980 MPa with exceptional elongation (24-34%) and n-value (≥0.20-0.24) through strain-induced martensitic transformation of retained austenite. Superior crash energy absorption for automotive longitudinal rails, B-pillars, and structural crash components. Thickness 0.6-3.0mm. IATF 16949 certified.
View Details →
Press Hardening Steel (PHS / 22MnB5 / Usibor 1500 equivalent) is hot stamping boron steel achieving 1,500–2,000 MPa tensile strength after die quenching for A-pillar, B-pillar, door ring, and anti-intrusion automotive structural components. AlSi-coated (60/60 g/m²). Thickness 0.7–3.0mm. VDA 239-100 / SAE J2340 / GB/T 32979 certified. IATF 16949. Blank and coil supply. PPAP support.
View Details →
Interstitial-Free Steel (IF Steel) — DC04 / DC05 / DC06 / DC07 — is ultra-low carbon cold-rolled deep drawing steel with exceptional plastic strain ratio (r̄ ≥ 1.6-2.1) and total elongation (A80 ≥ 38-45%) for automotive inner body panels and complex deep drawing applications. Thickness 0.4-2.5mm, width 600-1900mm. IATF 16949 certified with r-value and n-value certification.
View Details →
Martensitic Steel (MS1200 / MS1300 / MS1500 / MS1700) is Ultra High Strength Automotive Steel (UHSS) with 90–100% martensitic microstructure achieving tensile strength 1,200–2,000 MPa for B-pillar reinforcements, bumper beams, door intrusion beams, and EV battery enclosure structural sections. Thickness 0.5–3.5mm, width 600–2,100mm. EN 10346 / VDA 239-100 / JFS A2001 certified. IATF 16949. PPAP support.
View Details →
High Strength Low Alloy Steel (HSLA) achieves yield strength 315–700 MPa through microalloying (Nb, V, Ti) and TMCP without expensive heat treatment. Available as structural plate (S355–S690), automotive coil (S315MC–S700MC), pressure vessel plate (P355NH–P460NH), and offshore grades (API 2W/2Y). Thickness 1.5–200mm. EN 10025 / ASTM A572 / API 2W certified. Mill test certificate provided.
View Details →
High Edge Ductility Steel (HEdge 690 / HEdge 780 / HEdge 980) is next-generation AHSS combining tensile strength 690-980 MPa with extraordinary hole expansion ratio (HER ≥60-80%) through a homogeneous bainite-dominant microstructure, enabling reliable edge forming, flanging, and punched hole applications impossible with conventional DP steel. Thickness 0.6-3.0mm. IATF 16949 certified.
View Details →
Dual Phase Steel (DP590 / DP780 / DP980 / DP1180) is Advanced High-Strength Steel (AHSS) with ferrite-martensite dual-phase microstructure for automotive structural safety components. Tensile strength 590–1,180 MPa, excellent formability, high crash energy absorption. Thickness 0.5–4.0mm, width 600–2,100mm. IATF 16949 certified. PPAP support. Mill test certificate provided.
View Details →
Complex Phase Steel (CP800 / CP1000 / CP1200 / CP1400) is advanced high-strength multiphase steel for automotive structural and safety components combining tensile strength 800-1400 MPa with superior hole expansion ratio (HER ≥50%) for excellent edge stretchability and crash energy absorption. Thickness 0.5-8.0mm, width 600-1900mm. IATF 16949 certified.
View Details →
Bake Hardening Steel (BH210 / BH240 / BH260 / BH300) is cold-rolled ultra-low carbon steel for automotive outer body panels combining excellent formability during stamping with 30-50 MPa yield strength increase after paint baking. Thickness 0.4-2.5mm, width 600-1900mm. IATF 16949 certified.
View Details →
GB 40Cr is a chromium alloy steel round bar per GB/T 3077, equivalent to AISI 5140 / EN 41Cr4 / SCr440. Offers higher strength than carbon steel, reliable hardenability, and excellent induction hardening response. Diameter 10mm-500mm, ideal for shafts, gears, bolts, and medium-duty mechanical components.
View Details →
GB 42CrMo is a chromium-molybdenum alloy steel round bar per GB/T 3077, equivalent to AISI 4140 / EN 42CrMo4 / SCM440. Offers high strength, excellent hardenability, superior toughness, and good fatigue resistance. Diameter 16mm-600mm, available in hot rolled, Q&T, and nitrided conditions for oil & gas, wind power, and heavy machinery.
View Details →
AISI 4340 is a premium Ni-Cr-Mo alloy steel round bar with the highest hardenability, extreme tensile strength (up to 1800 MPa), outstanding low-temperature toughness, and superior fatigue resistance. Diameter 20mm-600mm, VAR/ESR grades available for aerospace and defense applications.
View Details →Overview of TRIP Steel (Transformation-Induced Plasticity Steel) Transformation-Induced Plasticity Steel (TRIP Steel) is a premium category of advanced high-strength steel (AHSS) that achieves an exceptional combination of high tensile strength and outstanding uniform elongation through a unique deformation mechanism —…
Overview of Press Hardening Steel (PHS) Press Hardening Steel (PHS), also widely designated as hot stamping steel, die quenching steel, or boron steel, is a specialist ultra-high-strength automotive sheet steel engineered to be formed into complex three-dimensional structural component geometries…
Overview of IF Steel (Interstitial-Free Steel) Interstitial-Free Steel (IF Steel) represents the pinnacle of cold-rolled deep drawing steel technology, engineered to achieve the maximum possible formability and deep drawability for automotive outer body panels, complex stamped components, and demanding deep…
Overview of Martensitic Steel (MS) Martensitic Steel (MS), also designated as Martensitic High Strength Steel (MHSS) or full martensite Ultra High Strength Steel (UHSS), is the highest-strength cold-formable automotive sheet steel product family, achieving tensile strengths from 1,200 MPa to…
Overview of High Strength Low Alloy Steel (HSLA) High Strength Low Alloy Steel (HSLA) is a category of engineered structural and automotive steel achieving yield strengths from 315 MPa to 700 MPa through the synergistic combination of grain refinement, precipitation…
Overview of High Edge Ductility Steel (HEdge) High Edge Ductility Steel (HEdge) is a next-generation advanced high-strength steel (AHSS) specifically engineered to overcome the edge cracking limitation that restricts the application of conventional dual phase (DP) and other multiphase steels…
Overview of Dual Phase Steel (DP) Dual Phase Steel (DP) is a category of Advanced High-Strength Steel (AHSS) characterised by a two-phase microstructure consisting of a soft, ductile ferrite matrix interspersed with hard martensite islands, typically comprising 10–30% martensite by…
Overview of Complex Phase Steel (CP) Complex Phase Steel (CP) is an advanced high-strength steel (AHSS) characterized by an extremely fine multiphase microstructure consisting of a ferrite and bainite matrix with small amounts of martensite, retained austenite, and pearlite, often…
Overview of Bake Hardening Steel (BH) Bake Hardening Steel (BH) is a specialized category of cold-rolled high-strength low-alloy steel designed specifically for automotive outer body panel applications where excellent formability during stamping must be combined with high dent resistance after…
Overview of GB 40Cr Alloy Steel Round Bar GB 40Cr is a widely used chromium alloy structural steel round bar specified under the Chinese national standard GB/T 3077 (Alloy Structure Steels). With carbon content of 0.37-0.44% and chromium content of…
Overview of GB 42CrMo Alloy Steel Round Bar GB 42CrMo is one of the most widely used and trusted alloy steel round bar grades in China and global markets, specified under the Chinese national standard GB/T 3077 (Alloy Structure Steels).…
Overview of AISI 4340 Alloy Steel Round Bar AISI 4340 is a premium nickel-chromium-molybdenum (Ni-Cr-Mo) alloy steel round bar recognized as one of the highest-strength, most versatile through-hardening alloy steels available in global engineering. With carbon content of 0.38-0.43%, nickel…
Tell us your exact requirements — grade, standard, dimensions and quantity. Our team will respond within 24 hours with competitive pricing.
All fields marked with * are required