Overview of Titanium Plate Titanium Plate is a flat-rolled product manufactured from commercially pure titanium or titanium alloys, supplied as individual cut plates or sheets in thicknesses from 0.5mm (thin sheet) to 100mm (heavy structural plate), providing the exceptional corrosion…
Overview of Titanium Pipe Titanium Pipe encompasses seamless and welded tubular products manufactured from commercially pure titanium and titanium alloys, engineered to deliver the extraordinary corrosion resistance, lightweight structural performance, and biocompatibility of titanium in piping, heat exchanger, and pressure…
Overview of Nickel Alloy Plate Nickel Alloy Plate refers to flat-rolled plate, sheet, and strip products manufactured from the nickel-based superalloy family — including Inconel (nickel-chromium-molybdenum), Hastelloy (nickel-molybdenum-chromium), Monel (nickel-copper), Incoloy (nickel-iron-chromium), and pure nickel grades — engineered to deliver…
Overview of Alloy Plate (Inconel / Hastelloy / Monel / Titanium) Alloy Plate refers to flat-rolled or hot-pressed thick flat product manufactured from nickel-based superalloys, titanium alloys, cobalt-based alloys, and other high-performance specialty metals, supplied as individual cut plates or…
Overview of Alloy Coil (Inconel / Hastelloy / Monel / Titanium) Alloy Coil refers to nickel-based superalloys, titanium alloys, cobalt-based alloys, and other high-performance specialty metals supplied in coiled strip or sheet form — thin flat product wound into a…
Overview of Alloy Bar (Inconel / Hastelloy / Monel / Titanium) Alloy bar refers to a category of high-performance metal bars made from nickel-based superalloys, cobalt-based alloys, titanium alloys, and other specialty metals designed for extreme service environments where stainless…
Overview of Stainless Steel Angle Bar Stainless Steel Angle Bar is a structural and fabrication steel section with an L-shaped cross-section produced from austenitic, ferritic, or duplex stainless steel grades, providing a combination of structural load-bearing capability and inherent corrosion…
Overview of 310S Stainless Steel Plate AISI 310S is a high-chromium, high-nickel austenitic stainless steel specifically engineered for extreme high-temperature service up to 1150°C, offering the best combination of oxidation resistance, sulfidation resistance, and carburization resistance among common austenitic stainless…
Overview of HRB500 Steel Rebar HRB500 is China’s latest generation high-strength hot-rolled ribbed steel reinforcement bar with a characteristic yield strength of 500 MPa. Specified under GB/T 1499.2-2018 standard, HRB500 represents the fourth-generation reinforcement steel that is gradually replacing HRB400…