Overview of Titanium Pipe Titanium Pipe encompasses seamless and welded tubular products manufactured from commercially pure titanium and titanium alloys, engineered to deliver the extraordinary corrosion resistance, lightweight structural performance, and biocompatibility of titanium in piping, heat exchanger, and pressure…
Overview of Titanium Bar Titanium Bar is a round, hexagonal, or rectangular solid cross-section product manufactured from commercially pure titanium or titanium alloys, providing the unique combination of exceptional corrosion resistance across the broadest range of aqueous and chemical environments…
Overview of Nickel Alloy Plate Nickel Alloy Plate refers to flat-rolled plate, sheet, and strip products manufactured from the nickel-based superalloy family — including Inconel (nickel-chromium-molybdenum), Hastelloy (nickel-molybdenum-chromium), Monel (nickel-copper), Incoloy (nickel-iron-chromium), and pure nickel grades — engineered to deliver…
Overview of Alloy Plate (Inconel / Hastelloy / Monel / Titanium) Alloy Plate refers to flat-rolled or hot-pressed thick flat product manufactured from nickel-based superalloys, titanium alloys, cobalt-based alloys, and other high-performance specialty metals, supplied as individual cut plates or…
Overview of Alloy Coil (Inconel / Hastelloy / Monel / Titanium) Alloy Coil refers to nickel-based superalloys, titanium alloys, cobalt-based alloys, and other high-performance specialty metals supplied in coiled strip or sheet form — thin flat product wound into a…
Overview of Alloy Bar (Inconel / Hastelloy / Monel / Titanium) Alloy bar refers to a category of high-performance metal bars made from nickel-based superalloys, cobalt-based alloys, titanium alloys, and other specialty metals designed for extreme service environments where stainless…
Overview of Square Steel Tube (SHS) Square Steel Tube, commonly designated as SHS (Square Hollow Section), is a hot-rolled or cold-formed structural steel hollow section with a square cross-section where all four sides are of equal width. SHS sections are…
Overview of Stainless Steel Angle Bar Stainless Steel Angle Bar is a structural and fabrication steel section with an L-shaped cross-section produced from austenitic, ferritic, or duplex stainless steel grades, providing a combination of structural load-bearing capability and inherent corrosion…
Overview of Unequal Leg Angle Steel Unequal Leg Angle Steel, also known as Unequal Angle, Asymmetric Angle, or L-Section with different leg lengths, is a hot-rolled structural steel section with an L-shaped cross-section where the two legs are of different…
Overview of Equal Leg Angle Steel Equal Leg Angle Steel, commonly referred to as Equal Angle, L-Section, or L-Shape, is a hot-rolled structural steel section with an L-shaped cross-section where both legs are of equal length. Equal leg angles are…
Overview of Wide Flange H-Beam W-Shape Wide Flange H-Beam, commonly called W-Shape or W-Beam, is a hot-rolled structural steel section widely used in North American and international steel construction. It features an H-shaped cross-section with parallel flange surfaces and a…
Overview of H-Beam Steel (HW / HM / HN) H-beam steel is a hot-rolled structural steel section with H-shaped cross-section, characterized by parallel flange surfaces and right-angle connections between the flange and web. Specified primarily under JIS G3192 (Japanese standard)…